режимы wifi dd-wrt

Wireless SSID Broadcast : Enable

[NOTE] - You CAN try using the same SSID but it usually will not work properly. Many have had random disconnects and/or no connection if the SSID's are the same. If using the same ssid doesn't work for you, use a different ssid from the primary router

Wireless Network Name(SSID) : Different from Primary Router

Network Configuration : Bridged

Wireless SSID Broadcast : Enable

Wireless Channel : Must Match Primary Router (This will disappear once you put it in RB mode, and isn't needed)

Wireless Network Name(SSID) : Must Match Primary Router - Make sure you spell this correctly

Wireless Network Mode : Must Match Primary Router

Wireless Mode : Repeater Bridge

Open the Wireless -> Basic Settings tab

Open the address in your web browser. Newer versions of DD-WRT will require you to set a password before you can continue.

Connect your computer to the secondary router via wired LAN port or as a wireless client. The dd-wrt default wireless SSID is "dd-wrt"

Set your computer to a static IP of 192.168.1.9 if you know how to set static addresses. Otherwise leave your computer's network adaptor(s) programmed with the factory default setting of DHCP and the router will assign a valid address to your computer.

Do a proper HARD 30-30-30 Reset on the router.

Restore Factory Defaults on Secondary (DD-WRT) Router

Настройки роутера с прошивкой DD-WRT на режим работы Client Bridge и Repeater Bridge. Объединение двух роутеров по WiFi. Расширить зону покрытия WiFi.

Оцените этот контент

DD-WRT настройки Client Bridge и Repeater Bridge

Факультет Информатики

DD-WRT настройки Client Bridge и Repeater Bridge - faippi.ru